Glossary for Chronojump Translators
ChronoJump, is a "complete multiplatform system for measurement,
management and statistics of the jump events" http://www.gnome.org/projects/chronojump/
The knowledge of different the kinds of jump, the specific terminology
and the concepts surrounding other "events" which
are measured, like runs and rhythms, may difficult the translation
of the software. The purpose of this document is to bring a clear
context to the translator and offer a small glossary of the terms
that can be confusing. There is also an intentional need to write
this document briefly, this guide was thought for being short and
practical.
Context: An sports evaluation
Commonly, the sports instructor, physical educator, trainer, kyneologist...
apply some tests to one or more people who jump (referred sometimes
as "persons" or "jumpers" in jump
tests) using an instrument nowadays connected to a computer. Typically
people are evaluated altogether in a day. As an example, the physical
educator can ask every student jump in three different ways. This
evaluation can developed at the beginning and in the end of the course,
and the good thing is that the evaluator is able to compare the results
of every student in the same day, or compare the evolution along two
days. Every day of evaluation is called a "session".
Each session has a name, place, date, possible comments, and also
people who perform a specific jump, run or pulses.
Glossary:
-
Abalakov Jump
- (also called "ABK")
a kind of simple jump* (we recommend
not to translate the term).
- ABK
- (See Abalakov jump*).
-
Chronojump
- Sometimes referred as the free
(GPL) software for managing the data coming from the Chronopic*
chronometer*, and sometimes
referred as the whole project: Software, Hardware, documentation,
website, ...
-
Chronometer
- Instrument used for measuring
time. In Chronojump project we use Chronopic*.
-
Chronopic
- Open Hardware used for recording
and managing the changes detected on the Platform*.
At this moment there are two Chronopic models (both using same firmware):
- CMJ
- (See Countermovement jump*).
-
Countermovement Jump
- (abbreviated
"CMJ") a kind of simple jump*
(we recommend not to translate the term).
-
Contact platform
- (See Platform*).
-
Contact time
- Time where the person is in
the platform. Also referred as Time of Contact*
or TC*.
- DJ
- (See Drop jump*).
-
Drop Jump
- (abbreviated "DJ") a kind
of simple jump* where there's a
previous fall from a determined height and then jumps. On this jump,
the recorded data is one contact time*,
and one flight time*. (we
recommend not to translate the term).
-
Event
- Simplification of "time event" where
we refer to something that's measured by time. On Chronojump we use
this word for referring Jumps*,
Runs* or Pulses*.
-
Finish
- Action of ending an event by pressing
a button. This action can be done for finishing an unlimited event*,
or making shorter a reactive jump*,
intervallic run* or pulse*.
-
Fligh time
- Time where the person is not in
contact with the platform. Also referred as Time of Flight*
or TF*.
-
Jump
- jump is one of the tree events*
that are currently evaluated. Also there are two kind of jumps: Simple
and Reactive.
- Simple jump:
- jump that have only one flight time*.
On this jump, jumper starts and ends inside the platform*.
There's a special type called Drop Jump*
where jumper falls down from a predefined height (called "falling
height"), and then jumps. In this case, the recorded data is one
contact time*, and one flight time*.
- Reactive jump
- (abbreviated "RJ") this jump is described as
a number of repetitive or reactive jumps performed consecutively.
All the contact times*,
and flight times* are recorded.
It's common to try to maintain as much time as possible low contact
and height flight time. This jump is limited (ended) by:
- the number of jumps: "Perform 'n' jumps"
- the jumping time: "Jump during 'n' seconds"
- unlimited: "Jump, and trainer will tell you when to stop".
-
Jumper
- The name of a person*
is called when does a jump*.
-
Load person
- As all data is stored in a database,
there's no need to define or create a new person*
twice, if one person is evaluated in one session*,
and we want to re-evaluate in another session, we call this action
"Load Person", and it has to be understood as "To use this
known person also in current session".
-
Person
- The human who executes the tests. Depending
on what he is doing, may be called as Jumper*
or Runner*. Person does not receive
a special name when is performing pulse*
tests.
-
Platform
- It's an instrument used for knowing
if a person is on the floor or in the air. A person can have two states
on the platform: inside or outside. On jumps*,
the time that a person is in the air (flight time*)
is used to find the height of the Center of Gravity of the jumper.
On Runs* the time that the person
is not in the platform is used to determine the speed. The platform
can be easily built following this instructions: http://www.gnome.org/projects/chronojump/construction_contact_platform.html
-
Pulse
- We call 'pulse' to the ability of a person
on following a rhythm (predefined or natural), and when this rhythm
is primary: only one repeating beat. The pulse contains a succession
of equal beats limited by time or unlimited (instructor decides when
to stop). On pulses we want to know the number of beats per second
and the rhythm of the pulse as time passes.
-
Report
- A detailed document containing the data
of the session* (date, place,
comments), the persons* who participated,
the events* developed, and statistics*
evaluated.
-
Run
- Run is one of the tree events*
that are currently evaluated. Also there are two kind of runs: Simple
and Intervallic.
- Simple run:
- run that have only one flight time*.
On this run, runner starts on the platform*,
or a few meters before it. The run stop when the runner arrives to
a second platform. It can be also done with only one platform in a
circular track. The ony registered data is the time that the person
is between the two platforms. This time is normally converted to an
average speed, knowing the distance between both.
- Intervallic run:
- this run is described as a number of individual
runs called tracks*. Every time
each track are recorded, and it's also converted to speed, as all
the tracks have the same distance. This run is limited (ended) by:
- the number of tracks: "Run 'n' tracks"
- the running time: "Run during 'n' seconds"
- unlimited: "Run, and the instructor will tell you when to stop".
-
Runner
- The name of a person*
is called when does a run*.
- RJ
- (See reactive jump*).
-
Session
- (See Context: An Sports
Evaluation*).
- SJ
- (See Squat jump*).
-
Squat Jump
- (abbreviated "SJ") a kind
of simple jump* (we recommend not
to translate the term).
-
Statistic
- Evaluation of one or more tests
presented on a tabular and/or graphical way.
-
TC
- (See contact time*).
-
TF
- (See flight time*).
-
Time of contact
- (See contact time*).
-
Time of flight
- (See flight time*).
-
Track
- Is the distance between two platforms in
a Intervallic Run*.
File translated from
TEX
by
TTH,
version 3.67.
On 3 Oct 2006, 21:44.