Contents
ROS-Industrial Hydro
The page provides instructions for installing the ROS-Industrial Hydro stacks on a PC and various robot controllers.
Prerequisites
All of the following ROS Industrial software must be installed on the ROS PC:
- ROS "Desktop Full" install
The instructions for installing ROS on Ubuntu can be found here.
ROS-Industrial Stacks
The ROS-Industrial stacks enable communication with an industrial robot and various other industrial hardware. There are two options for installation: binary packages and build-from-source.
Binary Package Installation (Recommended)
Binary package installation is recommended for most users. This installation can be performed from the command line using apt-get.
All released stacks: apt-get install ros-hydro-industrial-desktop
- Or by specific stack:
Industrial core: apt-get install ros-hydro-industrial-core
ABB stack: apt-get install ros-hydro-abb
Fanuc robot stack: apt-get install ros-hydro-fanuc
Motoman stack: apt-get install ros-hydro-motoman
Universal robot stack: apt-get install ros-hydro-universal-robot
Source Installation (Recommended for Developers)
Installation from source is only recommended for those who want the latest (unstable) functionality or those who want to modify the ROS-Industrial packages.
Repositories
The source code repositories can be found at the ROS-Industrial Github organisation.
Source Repository Layout
The ROS-Industrial git repository is organized similar to the ROS repository conventions, with one exception. ROS-Industrial releases (stable) are made from release name branches. release name-devel branches are reserved for continued development (potentially unstable). :
repository
...tags (all released versions)
...branches
...<release_name> (latest release - matches documentation)
...<release_name>-devel (latest development - may not match documentation)
Compile ROS-Industrial Stacks
All of ROS-Industrial is built using catkin. For more information see the Catkin wiki page.
Robot Controller Install
In addition to ROS PC installs, there is configuration and software installation required on most robot robot controllers. See the vendor specific stack tutorials for more information:
Motoman tutorials - Installing on the DX100, DX200 and FS100 controllers
ABB tutorials - Installing on the IRC5 controller
Fanuc tutorials - Installing on the R-30iA and R-30iB controllers
- UR tutorials (Coming Soon)
- Kuka tutorials (Coming Soon)
- Comau tutorials (Coming Soon)