[Documentation] [TitleIndex] [WordIndex

Only released in EOL distros:  

rb1_common: rb1_base_description | rb1_description | rb1_torso_description

rb1_base_common: rb1_base_description | rb1_base_localization | rb1_base_navigation | rb1_base_pad

Package Summary

The rb1_base_description package

rb1_base_common: rb1_base_control | rb1_base_description | rb1_base_localization | rb1_base_navigation | rb1_base_pad

Package Summary

The rb1_base_description package

Contents

  1. Overview
  2. Usage

Overview

This package contains the the urdf, meshes and other files needed to create the rb1_base description. The package has the following folders:

- launch: In this folder you will find the launch files ready to be executed

- meshes: In this folder you will find the STL files of the different parts of the robots

- robots: In this folder you will find the final description of the robot, where all the parts are integrated

- urdf: Here you will find the different possible parts of the robot. Each one is a xacro file that will be included in the final description

Usage

To view and manipulate the non-fixed joints in rviz, install the package and execute the following command:

roslaunch rb1_base_description rb1_base_rviz.launch

On the other hand, if you are using either the simulation or the real robot you will have to execute the following command:

roslaunch rb1_base_description rb1_base_state.launch

In case you want to change the robot's urdf, this can be found inside the robots folder.


2024-11-30 14:53