[Documentation] [TitleIndex] [WordIndex

  Show EOL distros: 

Package Summary

Provides an Interface to read the sensor output of a SICK Safety Scanner

Package Summary

Provides an Interface to read the sensor output of a SICK Safety Scanner

Package Summary

Provides an Interface to read the sensor output of a SICK Safety Scanner

Package Summary

Provides an Interface to read the sensor output of a SICK Safety Scanner

Package Summary

Provides an Interface to read the sensor output of a SICK Safety Scanner

A ROS Driver which reads the raw data from the SICK Safety Scanners and publishes the data as a laser_scan msg.

Supported Hardware

Supported are all microScan3, nanoScan3 and outdoorScan3 variants with Ethernet connection.

SICK microScan3

Getting started

The ROS driver will be released as a debian package, and therefore can be installed from binaries or from source.

Prerequisites

Installation

In the following instructions, replace <rosdistro> with the name of your ROS distro (e.g., kinetic).

From Binaries

The driver is released at longer intervals as a binary package. It can be installed with the following command:

sudo apt-get install ros-<rosdistro>-sick-safetyscanners

From Source

source /opt/ros/<rosdistro>/setup.bash
mkdir -p ~/catkin_ws/src/
cd ~/catkin_ws/src/
git clone https://github.com/SICKAG/sick_safetyscanners.git
cd ..
catkin_make install
source ~/catkin_ws/install/setup.bash

Starting

To start the driver the launch file has to be started. For the driver to work correctly, the sensor ip and host ip have to be defined. These parameters can be passed to the sensor as arguments via launch file.

roslaunch sick_safetyscanners sick_safetyscanners.launch sensor_ip:=192.168.1.10 host_ip:=192.168.1.9

This will start the driver and the dynamic reconfigure node. In this you can set different parameters on runtime, especially the angles and the data the sensor should publish. If these parameters should be set on startup they can be loaded to the parameter server beforehand.

To visualize the data start rviz and subscribe to the ~/laser_scan topic.

rosrun rviz rviz

Troubleshooting

Support

In case of technical support please open a new issue. Under https://github.com/SICKAG/sick_safetyscanners/issues

ROS API

Advertised ROS Topics

/scan (type: sensor_msgs/LaserScan)

Publishes a scan from the laserscanner

/extended_laser_scan (type sick_safetyscanners/ExtendedLaserScanMsg)

Extends the basic laser scan message by reflektor data and intrusion data.

/output_paths (type sick_safetyscanners/OutputPathMsg)

Gives feedback of the current status of the output paths.

/raw_data (type: sick_safetyscanners/RawMicroScanDataMsg)

Publishes the raw data from the sensor as a ros message.

Advertised ROS Services

/field_data

Returns all configured protective and warning fields for the sensor.

ROS parameters

Parameter Name

Type

Default

Required on startup

Information

sensor_ip

String

192.168.1.11

Sensor IP address. Can be passed as an argument to the launch file.

host_ip

String

192.168.1.9

Host IP address. Can be passed as an argument to the launch file.

host_udp_port

Integer

6061

Host UDP Port. Can be passed as an argument to the launch file. Zero allows system chosen port.

frame_id

String

scan

The frame name of the sensor message

skip

Integer

0

The number of scans to skip between each measured scan. For a 25Hz laser, setting 'skip' to 0 makes it publish at 25Hz, 'skip' to 1 makes it publish at 12.5Hz.

angle_start

Double

0.0

Start angle of scan in radians, if both start and end angle are equal, all angels are regarded

angle_end

Double

0.0

End angle of scan in radians, if both start and end angle are equal, all angels are regarded

channel_enabled

Boolean

true

If the channel should be enabled

general_system_state

Boolean

true

If the general system state should be published

derived_settings

Boolean

true

If the derived settings should be published

measurement_data

Boolean

true

If the measurement data should be published

intrusion_data

Boolean

true

If the intrusion data should be published

application_io_data

Boolean

true

If the application IO data should be published

use_persistent_config

Boolean

false

If this flag is set, the configured angles from the sensor are loaded and used and the ROS parameters angle_start and angle_end are disregarded


2024-12-07 18:20