[Documentation] [TitleIndex] [WordIndex

Only released in EOL distros:  

Overview

The qualification system is the core of the wg_hardware_test stack. This system allows Willow Garage production team members to test, evaluate and debug hardware components of the PR2 or Texai.

Note: The qualification system is only designed to run on specific machines at Willow Garage. This package has no external ROS or code API. Tools in this package will not work without proper configuration and/or authorization into Willow Garage systems.

Run GUI

To run the qualification GUI, go to the "Applications" menu on a test system, select "WG Hardware Applications" and run "PR2 Qualification".

To run from the command-line, run:

rosrun qualification qualify.py

A --debug option will enable debug mode. This is for developers only.

Qualification System Overview

The qualification system takes any serialized part, tests it, and logs the data.

Invent Logs

Parts that pass qualification are marked with in Invent with their "Test Status" key set to "PASS". Failed components are marked with "Test Status" set to "FAIL".

Test data in the form of tarfile attachments are loaded to Invent. Test parameters and measurements are also loaded to Invent so they can be analyzed later. The log files are stored in the "~/wg_hardware_test/qualification" directory before they are sent to Invent.

ROS Structure of Qualification

roslaunch_caller

Subtests, pre-startup scripts and shutdown scripts are run as separate processes and launched using roslaunch_caller.

Service Calls

The Qualification Manager advertises services to communicate with different subprocesses.

These services are only advertised when it there is a corresponding test, pre-startup script or shutdown script running.

Parameters

The qualification system sets parameters to configure different scripts. All parameters outside the following namespaces are wiped after each qualification test.

Flow of Qualification Tests

The qualification start page shows a prompt for a serial number and a "Continue" button. When an operator scans a part and presses "Continue", they are asked to select the correct test to run.

The following parts are launch files that are launched during the qualification system. Each launch file is specified in the "test.xml" file for a particular test.

Instructions

Instructions are loaded after a test is selected. The instructions page is an HTML document. Any images specified in the document are given relative to their local path. If "Cancel" is pressed while the instructions are displayed, the qualification system will return to the start screen and the device-under-test will not be marked as a failure. Pressing "Cancel" at any other time will fail the component.

Pre-startup Scripts

These launch files run after "Continue" is pressed from the instructions. Each prestartup script is designed to prepare the device-under-test and the fixture for testing. Prestartup scripts call a ROS service when they are complete. The service response can be:

Pre-startup scripts are torn down when the ROS service is called, the operator presses cancel, or a timeout is hit.

Startup Script

The startup script runs after the pre-startup scripts and before the subtests are launched. It generally loads any drivers or controllers needed to operate the device. It is only torn down when the test is complete.

Subtests

Subtests are launched sequentially. They terminate with a ROS service call, when "Cancel" is pressed, or after a timeout.

Shutdown Scripts

These scripts deactivate the test fixture after a test is complete. A shutdown script will always be called when the test is terminated, no matter what stage it was terminated in. The most common shutdown script disables power to the device under test.

Qualification Manager

The qualify.py script runs the qualification manager (GUI). Here is an overview of the relevant components of the qualification manager.

Configuration Loading

Modules result_dir.py, test.py, test_loader.py and wg_station.py load the configuration files to run the qualification station, and set up the environment. These modules are well covered by a unit test.

Manager / GUI

The core of the GUI is in qual_frame.py and component_qual.py. These modules have no software tests. The module cont_frame.py is for continuous operation of the qual system, an experimental feature.

Logging and Invent

The result.py module processes qualification results and submits them to Invent. This module has software tests in test_pr2_self_test.

There is a script in test_pr2_self_test/test/test_invent that tests that valid qualification data can be loaded to Invent. Any changes to Invent submitting should be checked with that script.

More Info

See also:

Writing Qualification Tests

See Writing Qualification Tests info page. For configuration scripts, see Component Configuration.

Component Qualification

The component qualification system run tests like hysteresis tests on different sub-assemblies of the robot. To qualify hardware, technicians scan components into the system. Each serial number corresponds to one or more tests to qualify different types of components. Each test is described in an XML file (ex: "tests.xml") that has pretests, startup scripts, subtests and shutdown tests. Most tests include:

Each subtest calls a pr2_self_test_msgs/TestResult service call, which gives the text of the result, a pass/fail indicator, and any plots from the tests. Subtests can pass automatically, which starts the next test automatically, or can request a human pass/fail input. The different subtests give the mechanical state of each component, and careful analysis of the data can show wear and failure modes. The system stores data automatically into the inventory system.

Component Configuration

The configuration system is used to reconfigure components (casters, grippers, cameras, etc) for installation on a robot. It can program a component as a left or right unit.

Test Machine Configuration

In order for the qualification system to run on a new machine, the following conditions must be me.

Accounts

You will need an account in the WG Inventory System or "Invent". You may set up the default Invent username and password by using the environment variables INVENT_USERNAME and INVENT_PASSWORD.

Permissions

The /hwlog directory must be read/writable to the user. The qualification system will write bag files of diagnostics to that directory.

The user home directory must be read/writable to the user. Temporary log files are written in ~/wg_hardware_test.

Configuration Files

The file wg_map.xml contains the entries for each computer or ("station") that the qualification system can run on. Any new machine must be added to this file.

  <station gui="qual2.willowgarage.com" host="qual2" 
           powerboard="1009" breaker0="True"
           breaker1="True" breaker2="True" >
    <env name="ECAT_PORT" value="ecat0" />
  </station>

Parameters in the "station" tag:

When the qualification system starts up, it determines which station the GUI is running on, and sets the power board and environment parameters as necessary.


2024-12-07 15:02